Size Guide

Download the size guide

Ring sizes are very precise. Please follow these instructions to obtain an accurate measurement:

1. Download the Size Guide by clicking below.

   Download Size Guide

2. Before printing, make sure that “Page Scaling” is set to “None” in the print dialog box (to open the print dialog press CTRL + P).
3. Print the document and measure the black bar you will find on it. It must measure exactly 30 mm in length.
   

You are now ready to find out your ring size. You can do this in two ways: using a ring you already own or by measuring your finger. Both options are explained below. Choose the one that suits you best.

Option 1: measure using a current ring

1. Select a ring that you wear regularly and that fits well on the finger you intend to wear the new ring on. In Spain, engagement rings and wedding bands are traditionally worn on the ring finger of the left hand, although customs may vary in other European countries.
2. Place the ring on the circles shown in the PDF document you downloaded (do not use the ones you see on the screen) and match the inner edge of the ring with the circle closest in size. This measurement refers to the inner diameter of the ring.
   
3. In the International Ring Size Chart below, you will be able to see which size corresponds to your measurement. If the ring falls between two sizes, we recommend choosing the larger size.

Option 2: measure your finger

Your ring should fit comfortably: snug enough so it does not fall off, but loose enough to slide over your knuckle.

1. Take a non-stretchable tape and wrap it around the finger on which you want to wear the ring.
2. Make a small mark where the two ends meet.
3. Measure the length and find the corresponding measurement in the International Ring Size Chart below to determine your exact size.

Avoid using string or elastic bands to measure your ring size, as these materials can stretch or twist, resulting in an inaccurate measurement.

If you are purchasing a ring from outside Europe, use the same chart where you will find international size conversions.

Tips for measuring your ring size

Finger size may vary depending on the time of day and the weather. For the most accurate result, we recommend:

• Measuring your finger at the end of the day when your fingers are warm, as they tend to be smaller early in the morning or in cold temperatures.
• Measuring your finger 3 or 4 times to avoid incorrect readings.

Tips for buying a ring as a surprise

• Ask friends or your mother if they know the correct ring size.
• Borrow a ring they usually wear on the intended finger (without them noticing) and use it to determine the correct size using the circle guide included in our downloadable Size Guide. You can also bring it to any of our boutiques, where we will measure it and provide the exact size.

Free resizing

Clemència Peris offers free resizing on all rings during the first year. Simply call us, send us an email, or visit one of our boutiques and we will assist you with the resizing process.

How to choose your bracelet size

Clemència Peris bracelets are available in three sizes: S, M and L. In the table below, you will find the length of each size in centimeters.

Clemència Peris bangle bracelets are offered in one size only.

Bracelet size chart (cm)

To determine the correct size, you can do it in three ways: using a bracelet you already own, with a measuring tape, or with the Clemència Peris wrist sizer. Each option is explained below.

Option 01: Choosing the size using another bracelet

1. Choose a bracelet you currently own that fits your wrist well.
2. Lay it flat and fully extended. Using a ruler (cm), measure the length between the tip of the clasp and the end of the bracelet. Note the measurement.
3. Check the Size Chart above to see which size corresponds to your measurement.

Option 02: Choosing the size with a measuring tape

1. Wrap the measuring tape around the wrist where you want to wear the bracelet.
2. Note the number where the tape meets 0. To ensure the bracelet fits comfortably, add 1.5 cm. You can later add or subtract centimeters depending on whether you prefer a loose, exact, or snug fit.

Option 03: Using de Clemencia Peris wrist sizer

Download the Clemència Peris Wrist Sizer and print it on an A4 sheet.

Download Wrist Sizer

You will need to perform a quick check to ensure the print is correct. Measure the black bar shown in the document. It must measure exactly 30 mm.

1. Make a small cut in the wrist sizer where indicated.
2. Place the sizer around your wrist and insert the pointed end through the hole you previously cut where it says “cut here”.
3. Pull the pointed end until it fits comfortably around your wrist.
4. The number aligned with the hole will indicate your size.
   
   

*This sizer is indicative and may not represent the exact size in all cases.

How to choose your necklace size

Clemència Peris necklaces are available in different sizes depending on the length of the piece. Please refer to the illustration below to see which necklace length corresponds to each size (XS, S, M, L). Measurements are indicated in centimeters.